HiPath BizIP Characteristics
From Wiki
Contents |
[edit]
System Limits
HiPath BizIP can be expanded to full capacity without project planning rules.
| Characteristics | Limits |
|---|---|
| ISDN basic rate interface (DSS1 protocol) | 2 simultaneous calls if one S0 line is present or 4 if two lines exist
No features like call forwarding in the network or call back on busy are currently supported. If configured internally, basic call for services voice and data with CLIP, CLIR, COLP, COLR is supported, currently no features like consultation. |
| VoIP trunk (SIP protocol) | Maximum eight simultaneous calls, depending on the DSL bandwidth to the network With G.729 compression, approximately 32 Kbps per call (this is the preferred compression for outgoing calls) With G.711 compression, approximately 90 Kbps per call Supported features: call ID (number), call ID suppression, call waiting, call forwarding, consultation, alternate, active call transfer and 3party conference |
| Simultaneously active VoIP providers | 1 |
| Number of VoIP station numbers | 10 for single accounts
1-4 digit numbers for PBX accounts |
| Number of ISDN station numbers | 10 per BRI (S0 port) in point-to-multipoint configuration, 8 for internal bus 1-4 digit numbers for a point-to-point connection (DID) |
| Number of subscribers |
|
| Number of stations for call groups | 10 (each group must contain at least one BizIP 410 telephone) |
| Number of external subscribers | 10 |
| Fax communication | From the analog ports via ISDN
Fax-over-IP via external commercial SIP Terminal Adapter with T.38 support, registered at HiPath BizIP |
| Entries in the phonebook | 200 (in addition to the internal stations) |
| Call data records | Last 500 data records can be accessed |
[edit]
Voice Transmission
- Quality of Service: QoS layer 2/3 in the LAN, layer 3 in the Internet (if supported by provider)
- Choice between high voice quality and low transmission bandwidth
- Voice compression according to G.711 (a/ยต-law), G.729 A/B or G.723
- Echo suppression according to G.168
- Voice Activity Detection (VAD) and Comfort Noise Generation (CNG)
- DTMF signaling according to RFC 2833
[edit]
BizIP Phones
| Telephones | BizIP 410 e | BizIP 410 a |
|---|---|---|
| Display | 2-line | 4-line backlighting |
| Programmable keys (with LEDs) | 12 | 19 |
| Dialog keys (optiGuide) | 3 | 3 |
| Loudspeaker | 
|
|
| Hands-free | no |
|
| Integrated voice box |
|
|
| Connection for headset |
|
|
| LAN 10/100 Base-T mini switch (Use 1 LAN cable for both telephone and PC) |
|
|
| Power over Ethernet (PoE) or optional power supply unit | IEEE 802.af (class 1)
| (class 2)
|
| Expandable with optiPoint key module | no | (1 key module, without Self-labelling key function) |
| Expandable with optiPoint adapters | no | (1 acoustic or recorder adapter) |
| Expandable with optiPoint display module or optiPoint application module | no | no |
| Colors | arctic, mangan | arctic, mangan |
| Dimensions (H x W x D) | 69 x 215 x 220 mm | 72 x 215 x 220 mm |
| Local power supply | optional (same as for optiPoint) | optional (same as for optiPoint) |
[edit]
BizIP Access Device
| Access Device | BizIP AD 20 |
|---|---|
| BizIP 410 telephones | 16 |
| Analogue stations (such as, fax, analogue telephone or entrance telephone) | 2 (Port 1 is preconfigured for fax) |
| Ethernet port for broadband Internet access (DSL modem) | 1 (10/100 Base-T)
1 LAN cable included (4 m) |
| Ethernet port for local network (LAN) | 1 (10/100 Base-T) |
| Basic rate ISDN network ports (S0) | 2 (either point-to-multipoint connection or point-to-point connection, not mixed) optionally configurable as internal bus 2 ISDN cables included (3m) |
| Dimensions (including wall mount) | 170 x 265 x 85 mm (H x W x D) |
| Power supply | 230 V, external with Euro plug,
variant with UK plug |
