optiPoint 410/420 S factory reset

From Wiki

Jump to: navigation, search

◄ How To

The reset to factory defaults at optiPoint 410/420 S phones can be done by Web-based management and local phone procedure.

Contents

[edit]

optiPoint 410/420 S display phones

[edit]

By Web-based management

Connect to the WBM and login as administrator. Select the item "Reset factory setting" and enter the reset PW 124816.


Select the item "Reset factory setting"
Enlarge
Select the item "Reset factory setting"

Note: Since factory settings may differ to the settings used for connecting to the WBM before, you may need to check IP address and L2/L3 settings before you can continue working with the WBM.

[edit]

By local phone procedure

Ensure that call control is on the phone, not the DSM ???.

  • Disconnect phone from LAN (only required for netboot < V2.01, PoE devices temporarily need external power supply).
  • Lift handset.
  • Type in reset code Image:opk-minus.png Image:opk-plus.png Image:opk-ast.png Image:opk-3.png.
  • Type in reset password Image:opk-1.png Image:opk-2.png Image:opk-4.png Image:opk-8.png Image:opk-1.png Image:opk-6.png and press the Confirm button Image:opk-ok.png.
  • Replace handset.
  • If required, re-connect phone to LAN.
[edit]

optiPoint 410 entry S

[edit]

By Web-based management

(TBD)

[edit]

By local phone procedure

  • Disconnect phone from LAN (except PoE).
  • Press keys simultaneously Image:opk-3.png Image:opk-8.png Image:opk-9.png.
  • Press the key Image:opk-ast.png.
  • Type in reset password Image:opk-1.png Image:opk-2.png Image:opk-4.png Image:opk-8.png Image:opk-1.png Image:opk-6.png.
  • Press the key Image:opk-rau.png.
  • Connect phone to LAN (except PoE).
[edit]

See also

Retrieved from "http://wiki.siemens-enterprise.com/index.php/optiPoint_410/420_S_factory_reset"
Personal tools
Information