optiPoint WL2 professional

The optiPoint WL2 professional utilizes industry-standard wireless LAN (WLAN) technology to enable mobile communication in office and industry environments. By leveraging the same WLAN environments that are used for corporate data applications, optiPoint WL2 enables companies to save on infrastructure costs, and benefit from converged voice and data applications.

The optiPoint WL2 professonal is a CorNet IP (HFA) phone using Wireless LAN for connectivity. There is also a WLAN phone based on SIP (optiPoint WL2 professional S).

Key Features

• 6 lines LCD color display, 128x128 pixels, 4096 colors
• Voice Recognition Dialing
• Built-In Headset jack
• Hands-free speaking
• WLAN IEEE 802.11b/g connectivity

Documentation

The optiPoint WLAN phones are shipped with a printed document providing brief instruction regarding installation and operation. For both user and administrators, a comprehensive and updated documentation is provided as PDF files.

More documentation in further languages for wireless phones can be found on www.siemens-enterprise.com.

  English

•   Datasheet optiPoint WL2 professional readme
•   Quick Reference Guide optiPoint WL2 professional readme
•   User Manual optiPoint WL2 professional HP2000-HP3000 readme
•   User Manual optiPoint WL2 professional HP 4000 readme
•   Administration Manual optiPoint WL2 professional readme
•   Administration Manual optiPoint WL2 for Web Based Management readme

  Deutsch

•   Datenblatt optiPoint WL2 professional readme
•   Quick Reference Guide optiPoint WL2 professional readme
•   Administration Manual optiPoint WL2 for LDAP Access readme

Platforms / Systems

The optiPoint WL2 professional is released for the following HiPath platforms

Firmware / Software

The phone software can be downloaded to the phone:

• via FTP (controlled by WBM)
• via HiPath DLS (Deployment Service)

The current Application software is V1.0 R2.52.0 (50.002.52).

To get an overview of current and previous release notes (if any) of optiPoint WL2 V1.0 see the complete Release Notes history.

Open Source Software

You can download the Open Source Software parts used by the optiPoint WL2 professional, licensed under an Open Source Software License and developed by third parties.

  optiPoint WL2 professional Open Source software (2009-03-19, 46.155.042 Bytes, zipped)

Interoperability Matrix

For detailed interoperability information please check the optiPoint WL2 professional interoperability matrix page.

Supported Access Points

The interworking with following Wireless LAN Controllers and Access Points was tested:

• HiPath Wireless Convergence infrastructure (Software version 3.1.4.03.03 and later)
  • HiPath Wireless C10 controller
  • HiPath Wireless C100 controller
  • HiPath Wireless C1000 controller
  • HiPath Wireless AP2610 access point
  • HiPath Wireless AP2620 access point (external antennas)
• HiPath standalone Access Points (SW version 1.0.2.00.00 and later):
  • HiPath Wireless AP2630 access point
  • HiPath Wireless AP2640 access point (external antennas)
• Cisco AP Aironet 1231 (SW version 12.3(7)JA2, c1200-k9w7-tar.123-7.JA2.tar)

Recommandations how to perform a site survey are described in the following documents:

•   HiPath Wireless site survey guide readme
•   Recommendations for site survey optiPoint WL2 readme

Call features

• (Introduction)
• (Additional information)

Local Call Features

Central Call Features

Mass deployment

See Mass Deployment.

Add-on devices, Adapters and Accessories

List of accessories

See also

• optiPoint WL2 professional Release Notes
• optiPoint WL2 professional interoperability matrix
• optiPoint WL2 professional family (CorNet-IP/SIP) Surveying Mode
• optiPoint WL2 professional three steps software update
•   Hipath Wireless Access Points Datasheet readme