optiPoint WL2 professional S Release Notes
From Wiki
The optiPoint WL2 professional (SIP) Release Notes help you to find, in descending order:
- New implemented features
- Corrected bugs
- Known and still open issues (eventually with workarounds)
for each optiPoint WL2 professional SIP software version considered.
Contents |
[edit]
Software versioning / naming
A new software versioning scheme was introduced, it requires that a new versioning name should be adopted for each software product.
Software product version will be now identified with the string:
V x[.y] R m.f.h
in which field:
- x[.y] denotes the Major release level
- m denotes the Minor release level
- f denotes the Fix release level
- h denotes the Hotfix level
| This naming convention scheme does not imply any naming requirements for file / files available. |
More informations on the New Software Versioning scheme wiki page.
[edit]
V1.0 70.000.54
In the tables below:
- What's New
- Problems Fixed
- Outstanding Customer Problems
[edit]
What's New
| ID | Cluster | Summary |
|---|---|---|
| H16223 | Anonymous syslog required | |
| H17116 | Enter start and stop of calls in syslog | |
| H17262 | Discard weak APs in roaming scan table | |
| H18093 | sgRtpSetSource connects in TX direction even if it shouldn't | |
| H18101 | SSRC changes short after the beginning of the call | |
| H18225 | Save and restore date information in file |
[edit]
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| NA03022835 | TR: Ansagetext der Xpressions ist am optiPoint WL2 professional S verzerrt | |
| NA02923400 | TR : optiPoint WL2 professional S needs a reboot after switching to 2nd HiPath Wireless Controller | |
| NA02987656 | TR: Transport protocol TCP only with Outband-Proxy possible | |
| NA02776557 | TR: optiPoint WL2 bekommen keine IP via DHCP an Cisco 851 WLAN | |
| NA03022389 | TR: Keine Expires Meldung beim ausschalten des optiPoint WL2 S |
[edit]
Known & Open Issues
| ID | Summary | Workaround |
|---|---|---|
| G77949 | The value RDT is not available in the QDC data packets from optiPoint WL2 professional S | N/A |
[edit]
V1.0 70.000.52
In the tables below:
- What's New
- Problems Fixed
- Outstanding Customer Problems
[edit]
What's New
| ID | Cluster | Summary |
|---|---|---|
| H08622 | Feature | Radio Channels selective scanning option configurable via optiPoint WL2 professional S WBM only (not via HiPath DLS too) |
[edit]
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| H10590 | Fixed Audio CoDec G.722 problem (Audio CoDec G.722 is not supported) | |
| H10854 | Call Forwarding with URI does not work | |
| H12961 | CoDec G.711 u-Law and CoDec G.711 A-Law priority not adjustable | |
| H12957 | optiPoint WL2 professional S first syllable is completely swallowed | |
| H10754 | Call Transfer out of 3rd Party Conference does not work | |
| H13531 | Comfort noise without Silence Suppression flag being set |
[edit]
Known & Open Issues
| ID | Summary | Workaround |
|---|---|---|
| G77949 | The value RDT is not available in the QDC data packets from optiPoint WL2 professional S | N/A |
[edit]
V1.0 70.000.50
In the tables below:
- What's New
- Problems Fixed
- Outstanding Customer Problems
[edit]
What's New
None within this software release (It's a Fix release).
[edit]
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| H03707 | Worse roaming behaviour and bad speech quality | |
| H01741 | Call interrupted if SIP-options request is received | |
| H08191 | Missing '\0' after strncpy in WLAN location service | |
| H10675 | Bad voice quality with optiPoint WL2 professional S V1.0 release 70.000.49. | |
| H11031 | optiPoint WL2 professional S V1.0 should support DHCP Option 12 (Hostname) |
[edit]
Known & Open Issues
| ID | Summary | Workaround |
|---|---|---|
| G77949 | The value RDT is not available in the QDC data packets from optiPoint WL2 professional S | N/A |
| H10590 | Audo CoDec G.722 is not supported | N/A |
[edit]
V1.0 70.000.49
In the tables below:
- What's New
- Problems Fixed
- Outstanding Customer Problems
[edit]
What's New
None within this software release (It's a Fix release).
[edit]
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| G96034 | TR: Bad voice quality - connection not possible | |
| G97486 | SOLV30: outgoing call does not work in survivability mode | |
| G99152 | phone (audiod) crashes during endurance test | |
| H00768 | phone_app crashes during continous tests | |
| H03960 | Rolling reboots once entered HiPath DLS name, optiPoint WL2 professional S is corrupted |
[edit]
Known & Open Issues
| ID | Summary | Workaround |
|---|---|---|
| G77949 | The value RDT is not available in the QDC data packets from optiPoint WL2 professional S | N/A |
[edit]
V1.0 70.000.48
In the tables below:
- What's New
- Problems Fixed
- Outstanding Customer Problems
[edit]
What's New
None within this software release (It's a Fix release).
[edit]
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| ... | ... | ... |
[edit]
Known & Open Issues
| ID | Summary | Workaround |
|---|---|---|
| G77949 | The value RDT is not available in the QDC data packets from optiPoint WL2 professional S | N/A |
[edit]
V1.0 70.000.45
In the tables below:
- What's New
- Problems Fixed
- Outstanding Customer Problems
[edit]
What's New
None within this software release (It's a Fix release).
[edit]
Fixed Bugs
| ID | Cluster | Summary |
|---|---|---|
| G83472 | WBM | optiPoint WL2 professional S: WBM - False Tracer status indication on WBM |
| G86397 | Feature | Crash after "Copying a number to Dir" during an anonymous call |
| G86682 | HS trace settings are reset to default after entering PIN | |
| G87107 | Trace Settings: the Undo selection goes to Handset Web Page | |
| G87597 | optiPoint WL2 professional S sends no PS-Poll during voice call with IEEE 802.11g only wireless network | |
| G87796 | Copy-To-Dir of IP-Address during active call is not possible | |
| G87811 | SIP Local Port 5100 does not work | |
| G88181 | UI | Display flickers by change of red./call.-list and directory |
| G88524 | HS Trace data is not created | |
| G88581 | No confirmation tones during Reset by Hidden procedures | |
| G82829 | Listeninhalt der CallsList wird gelö wenn Listentyp geändert | |
| G83139 | optiPoint WL2 professional S: problem with Prefer Preparation editor/fault in help file | |
| G86391 | WBM | WBM: Error Message when download not successful |
| G86392 | "Call Forwarding": edit of IP-Port not possible for ... | |
| G86393 | WEB pages: wrong implementation of "Prefer Preparation Editor" | |
| G86399 | WPA 2 / WBM: delete encryption type | |
| G91605 | WBM | TR: WEB Page ADMIN sub menu is only in German Language |
[edit]
Known & Open Issues
| ID | Summary | Workaround |
|---|---|---|
| G77949 | The value RDT is not available in the QDC data packets from optiPoint WL2 professional S | N/A |
[edit]
V1.0 70.000.43
In the tables below:
- What's New
- Problems Fixed
- Outstanding Customer Problems
[edit]
What's New
| ID | Cluster | Summary |
|---|---|---|
| 1022 | Feature | Dialing via shortcut to which only a empty number is assigned: NC tone was missing |
| 1024 | WBM (Active) | Now it's possible to Switch Off HS via long press of On-Hook key |
| 1025 | Phone interface | Within submenu Contrast, Brightness some NC tones added |
| 1035 | WBM | Encryption type is redundant, as handset does only support TKIP |
[edit]
Fixed Bugs
None
[edit]
Known & Open Issues
Wenn ein WL2 S an einem SIP-Provider angemeldet ist und dieser SIP-Provider nicht auf den Standard-SIP Port 5060 läuft, sondern bsp. auf 5070, dann kann sich das WL2 S zwar dort anmelden (wenn man den Port am WL2 angegeben hat), aber es kann keine abgehenden Gespräche führen, da das WL2 immer die INVITE-Pakete auf 5060 sendet.
